VScom USB-100TX USB To Fast Ethernet Adapter
V2.03
Dec. 18, 2000 |
Welcome to Fast Ethernet Controller Provider's growing family of users,
and thank you for purchasing one of our networking products.
Content:
- Getting Started ->
- Installation Guide ->
- Advanced Setting ->
- Driver files ->
- Driver/Utility Version ->
- Record of Revisions For Driver Releases ->
1. Getting Started
First, please refer to the Installation Guide for complete installation
instructions. When installing the adapter onto your computer, make sure
the USB port has Series "A" connector.
2. Installation Guide
"text" : Windows Message
<text> : Button
[text] : Function/Icon
- Power on the computer system.
- Plug the VScom USB-100TX USB to Fast Ethernet adapter into
the USB port of host computer.
- When the Win98/ME/2000 system asks for the driver, make sure that you select;
- Win98 :
<Search for the best driver for
your device(Recommended)>
- WinME :
<Automatic search for a better
driver(Recommended)>
- Win2000:
<Search fo a suitable driver for
my device(recommended)>
- In the next screen when Win98/ME/2000
"searches for driver", please make sure
that <Specify a location>
is selected.
While on the same screen, insert the driver diskette. Then click on
<Next> button to go on to the
next screen.
Win2000 will automatic to find the driver location.
- The system display a
"found a driver for this device"
client window, click <Next> again.
- Then the system will copy the necessary driver files, click
<Next> again
(Win2000 is <Yes> button).
- Then Driver installation completed, click
<finish>.
- Reboot the system(Win98/ME) and check into the [MyComputer->Device manager]
to confirm that the VScom USB-100TX USB to Ethernet adapter is working properly.
- Add other network protocols or network services from [Network] when needed.
3. Advanced configuration
- Flow Control
- Method for ensuring that a transmitting entity does not overwhelm a
receiving entity with data.
- Flow Control Base Rx Size
- To set the maximum buffer size(Kbytes) of the receiving entity. If the
buffer is full-filled ,the incoming data over will be dropped.
- Flow Control Base Rx Packet
- To set the maximum buffer size(packets) of the receiving entity. The
maximum setting is 16
- Link Status Wakeup
- The ability to wake up the machine upon link status alternate.
- Magic Packet
- A kind of special packet-format to wake up the asleep machine
- Media Type
- To set the link ability of the machine to 10half-duplex,10full-duplex,
100half-duplex,100full-duplex, or Auto Negotiation.
- Select Media
- To set the media of the LAN, Ethernet, HomePNA or Fiber.
- Test Mode
- This is the internal undocumented test mode.
4. Driver files
| Files and Subdirectories |
Description |
| ADM8511.SYS |
The NDIS 5 driver support Windows 98/98_SE/ME and
Windows 2000 on x86 platform. |
| NET8511.INF |
Windows NT 3.5x and NT 4.0 driver installation
information file. |
| NET8511.CAT |
This digital sign file prove that the driver had pass
PC99 certification. |
| RELEASE.TXT |
This file presents a summary of the contents of your
Driver Diskette and record of revisions for driver releases. |
5. Driver/Utility Version
| Driver/Utility |
Filename |
Version |
| NDIS 5 Driver(Windows 98/98_SE/ME, Windows 2000) |
ADM8511.SYS |
2.03 |
6. Record of Revisions For Driver Releases
| Version |
Date |
Changes |
| V2.00 |
08/21/2000 |
Supported BOTH AMD & NS homephy, and supported NS C version. |
| V2.01 |
09/14/2000 |
- Supported AD version.(not supported AC version)
- Fixed Autosense cannot change from HomePNA to Ethernet.
- Remove all "ADMtek" this word.
- Test mode change default value. Form Mode1->Mode2.(modified .inf file)
|
| V2.02 |
09/25/2000 |
Use GPIO3 to indicate Link Status.Supported NS HomePNA phyter
C version test mode.(NS chip pin 43 must tie to ground).
(we did need reset PHY in check for hang routine.) |
| V2.03 |
12/18/2000 |
Just adjust source code. |
*** All trademarks or brand names mentioned are trademarks or registered
*** trademarks of their respective companies.