| Features |
- Controls 1 RS232/422/485 device located virtually anywhere via Ethernet, WLAN or Internet
- Easy selection of RS232, RS422 or RS485 by single DIP switch or individually by software
- Port expansion over USB A connector
- LAN 1000/100/10 Ethernet auto-detect
- NetCom Manager automatically finds NetCom+ devices in the network
- Configuration over Driver Panels, serial Port, Telnet, WEB Browser, SNMP
- Automatic mode switching between Driver and Raw Mode
- Supports TCP/IP, UDP, Telnet, DHCP, ICMP, HTTP, SNMP V1/2c/3, DNS, PPP, openVPN
- SSL/AES-256 encryption on Ethernet, WLAN and Internet
- Optional: Wireless network IEEE 802.11b/g/n
|
| Specifications |
| Interface |
Ethernet interface |
Auto-detecting 1000BaseT/100BaseTx/10BaseT (GigaLAN)
Connector 8P8C (RJ45) |
Wireless interface |
Optional via internal module or external USB stick
IEEE 802.11b/g/n operation in Access Point or Client Mode |
Protocols |
TCP/IP, UDP, Telnet, PPP, DHCP, ICMP, HTTP, LPD, SNMP V1/2c/3, DNS, openVPN |
No. of serial port |
1x DSUB 9 male connector (as PC) |
Serial interface |
RS232/422/485 selected by software or DIP-switch |
Available Modes |
RS232 full duplex
RS422 full duplex (120Ω on/off)
RS485 4 wire, full duplex (120Ω on/off)
RS485 2 wire, half duplex (120Ω on/off)
Internal Termination, controlled by operation mode
BIAS resistors not required |
Signals |
RS232: TxD,RxD, RTS,CTS, DTR,DSR, DCD, RI, GND
RS422: Tx+/-, Rx+/-, GND
RS485 2 wire: Data+/-, GND
RS485 4 wire: Tx+/-, Rx+/-, GND
|
RS485 Data control |
Controlled by ART (Automatic Receive Transmit control) |
USB port |
USB 2.0 High Speed, for WLAN and serial port expansion |
| Serial Performance |
Speed |
RS232: 200 bps to 921.6/1000 kbps
RS422/485: 200 bps to 3.7Mbps
Supports non-standard baudrates |
Parity |
None, even, odd, mark, space |
Data bits |
5, 6, 7, 8 |
Stop bits |
1, 2 |
| Operating Modes |
Driver Mode |
VScom Driver for Windows up to 10, Server up to 2008 R2,
both x86 and x64 Editions.
The Driver creates a virtual Com port, using VScom NetCom protocol. |
Other Modes |
TCP Raw Server, TCP Raw Client, Null Modem Tunnel, UDP Mode, Print Server and IP Modem |
| Power and Environment |
Connector |
3-pin Terminal Block with Protective Earth |
Power requirements |
9 - 54V DC, 0.3A @ 12V, 4W |
Dimension |
115×73×25 mm³ (W×L×H) |
Operating Temp |
−20°C - 65°C |
Storage Temp |
−20°C – 85°C |
Case |
SECC sheet metal (1mm) |
Weight |
0.4kg |
Mounting |
DIN-Rail (optional)
Wall mount (optional)
|
| Special Features |
Installation |
For easy installation the configuration utility NetCom Manager automatically finds NetCom+ devices in the network |
Operating mode |
Automatic mode switching between Driver and TCP RAW Server mode. |
PPP Access |
Dial-In to a modem attached to a serial port using Point to Point Protocol. TCP/IP is transported over the serial line, allowing access to configuration and the serial ports, even without Ethernet. |
Configuration |
Configuration over Driver Panels, NetCom Manager, WEB Browser, serial console, Telnet, SNMP |
Firewall |
Special precautions for Firewall environments |
Firmware |
Firmware update over WEB Browser |
LEDs |
LEDs for Power, Ready, WLAN, serial Tx, Rx, Ethernet Link, Speed |
| Security |
Password access |
Every capabilities of configuration use the same password including SNMP V3 |
Secure communication |
OpenVPN™ SSL tunnel provides security on Ethernet and Internet. The tunnel protects configuration and serial data, especially convenient to use across the Internet. OpenVPN software is available for many systems, including Windows, Linux and Mac OS. Strong encryption by AES up to 256 bit keys. |
Packaging
Packing list |
NetCom Plus Serial Device Server
CD-ROM with Driver and configuration software
Terminal block for Power Supply
|
|
| |
|
|
* Specifications are subject to change without notice.
* All the trademarks and brands are property of their rightful owners.
|
|
|
9-pin Female to 9-pin Terminal Block Adapters
